Typical ranges for all 21 products we supply. We can supply most sizes, grades and surface finishes on request — ask us for a size program tailored to your project.
How to read these specs. Values shown are typical commercial ranges rather than a fixed catalogue. Coil thickness, width, zinc coating and paint finish are produced to order against your specification. For fasteners, wire gauge and length can be mixed within one carton. Anything not listed here we can usually supply — send us your requirement and we will confirm feasibility, applicable mill standard and price.
Typical ranges are shown below — we can supply most sizes, grades and surface finishes on request. Ask us for a size program tailored to your project.
Rolled above recrystallization temperature, HRC offers excellent strength and formability for heavy-duty applications. Available as pickled & oiled (P&O) on request.
| Thickness | 1.2 mm – 25.0 mm |
| Width | 600 – 2000 mm (slitting available) |
| Coil ID / Weight | Ø 508 / 610 mm · 5 – 28 tons |
| Standards | GB/T 3274, JIS G3101, ASTM A36 / A1011, EN 10025 |
| Surface | Black / pickled & oiled (P&O) |
| Applications | Structural steel, pipe & tube making, shipbuilding, bridges, automotive frames, general fabrication |
Rolled at room temperature for tighter tolerances, a smoother surface and better flatness — the preferred substrate for precision stamping and high-gloss finishing.
| Thickness | 0.15 mm – 3.2 mm |
| Width | 600 – 1800 mm |
| Coil ID / Weight | Ø 508 / 610 mm · up to 18 tons |
| Standards | JIS G3141, EN 10130, GB/T 5213, ASTM A1008 |
| Surface / Finish | Bright / matte, lightly oiled or dry |
| Applications | Home appliances, automotive panels, office furniture, electronic enclosures, deep-drawn parts |
Continuous hot-dip zinc coating protects against rust in outdoor and humid environments. Choose spangle type and coating weight to fit your climate and budget.
| Thickness | 0.15 mm – 6.0 mm |
| Width | 600 – 1500 mm (slitting available) |
| Zinc Coating | 40 – 275 g/m² (Z40 – Z275) |
| Standards | JIS G3302, ASTM A653, EN 10346, GB/T 2518 |
| Surface | Regular / minimized / zero spangle · skin pass · chromated / oiled |
| Applications | Roofing sheets, purlins, cable trays, ducts, fencing, automobile parts, household appliances |
Alu-zinc coating combines the long-term corrosion resistance of aluminum with the edge protection of zinc — roughly 2–4× the life of galvanized in many environments.
| Thickness | 0.15 mm – 3.0 mm |
| Width | 600 – 1500 mm |
| Coating | AZ30 – AZ150 (55% Al + 43.4% Zn + 1.6% Si) |
| Standards | JIS G3321, ASTM A792, EN 10346, GB/T 14978 |
| Surface | Spangle free, smooth / matte |
| Applications | Roofing & wall cladding, solar panel frames, air-conditioner parts, garage doors, agricultural buildings |
Galvanized substrate coated with primer + top paint in hundreds of RAL colors. Consistent color, gloss and adhesion — ready for roofing sheet lines and building panels.
| Thickness | 0.15 mm – 1.5 mm (base) |
| Width | 600 – 1500 mm |
| Substrate | Hot-dip galvanized, Z40 – Z275 |
| Paint System | Polyester (PE) · Silicone modified (SMP) · HDP · PVDF |
| Top / Back Coat | Top 15–25 µm + back 5–10 µm epoxy / polyester |
| Applications | Roofing & wall sheets, steel buildings, home appliances, ceiling panels, small household hardware |
Premium color-coated coils on galvalume substrate. Excellent anti-corrosion performance and long color retention — a favorite for premium roofing and sandwich panels.
| Thickness | 0.20 mm – 1.5 mm (base) |
| Width | 600 – 1500 mm |
| Substrate | Galvalume (Alu-Zinc), AZ70 – AZ150 |
| Paint System | PE / SMP / HDP / PVDF with anti-fingerprint option |
| Top / Back Coat | Top 15–25 µm + back 5–10 µm |
| Applications | Sandwich panels, standing-seam roofing, coastal buildings, cold-storage panels, house façades |
No longitudinal weld — uniform strength and pressure resistance. Hot-rolled or cold-drawn, hydrostatically tested, with plain or beveled ends and export-standard packing.
| Outer Diameter | 6 mm – 660 mm |
| Wall Thickness | 1 mm – 60 mm |
| Length | 5.8 – 12 m (fixed / random) |
| Standards | API 5L, ASTM A106 / A53 / A519, GB/T 8163, GB/T 9948, DIN 1629 |
| Grades | Gr.B, X42 – X70, 20#, 45#, 16Mn / Q345B, 10# |
| Applications | Oil & gas pipelines, boilers & heat exchangers, hydraulic & fluid transport, structures, machinery shafts |
Bright zinc-plated drywall screws for flush, corrosion-resistant fixing of gypsum board, fiber-cement board and light steel partitions. Consistent thread, sharp point and no rust on humid jobsites.
| Diameter | #6 – #10 (3.5 – 4.8 mm) |
| Length | 25 – 80 mm (1″ – 3¼″) |
| Head / Drive | Bugle head · Phillips No.2 cross recess |
| Thread | Coarse (wood studs) / Fine high-low (metal studs) |
| Material & Finish | Low-carbon steel wire, case hardened · electro-zinc plated |
| Standards | ASTM C1002 · DIN 7982 · GB/T 846 |
| Applications | Gypsum board & plasterboard to wood or steel studs, ceilings, partitions, fiber-cement board |
Black phosphate coated drywall screws — a low-glare, corrosion-resistant finish with a slight friction-dampening layer for easier driving. Ideal for standard drywall installations and board-to-steel framing.
| Diameter | #6 – #10 (3.5 – 4.8 mm) |
| Length | 25 – 80 mm (1″ – 3¼″) |
| Head / Drive | Bugle head · Phillips No.2 cross recess |
| Thread | Coarse (wood studs) / Fine high-low (metal studs) |
| Material & Finish | Low-carbon steel wire, case hardened · black phosphate coating |
| Standards | ASTM C1002 · DIN 7982 · GB/T 846 |
| Applications | Gypsum board to wood or steel studs, ceilings, partitions, fiber-cement board, general drywall |
High-carbon hardened & tempered nails built to drive into concrete, brick and block without bending or breaking. Blued or galvanized finish with knurled shank for extra grip.
| Diameter | 2.0 – 4.5 mm |
| Length | 25 – 100 mm (1″ – 4″) |
| Material | High-carbon steel (45# / C45), hardened & tempered, HRC 45–55 |
| Head / Shank | Flat round head · smooth / knurled diamond shank, sharp point |
| Finish | Blued (black oxide) or galvanized |
| Standards | ASTM F1667 · GB/T 343 (wire) · export grade |
| Applications | Fixing to concrete, brick & blockwork, flooring, formwork, timber framing |
PE/PP cable clips with an attached high-carbon steel nail. Push the wire into the channel, hammer the nail in and the cable is fixed securely — quick, clean indoor wiring.
| Type | Round · Square · dual-nail; nail-attached (plug-in) |
| Size | Round inner Ø4 – 40 mm · square 4 – 14 mm (custom) |
| Nail | High-carbon steel, Ø2.1 mm × 19 mm, fixed to clip |
| Body Material | PE / PP, impact & UV resistant |
| Colors | White, black, grey (custom) |
| Packing | 100 pcs per bag, then export cartons |
| Applications | Indoor wiring: fixing electric & network cables, telephone lines, small tubes and conduit to walls, ceilings, baseboards |
Hot-dip galvanized roofing nails with a wide umbrella head and optional EPDM sealing washer — the ideal companion to your corrugated GI/PPGI roofing sheets for a leak-proof fix.
| Diameter | 3.0 – 4.5 mm |
| Length | 65 – 100 mm (2½″ – 4″) |
| Head | Wide umbrella head Ø9.5 – 11 mm (integral or loose washer) |
| Washer | Optional black EPDM rubber sealing washer |
| Material & Finish | Low-carbon steel, hot-dip galvanized |
| Standards | ASTM F1667 · ASTM A153 (HDG) · export grade |
| Applications | Fixing corrugated GI/PPGI roofing & wall sheets to timber or steel purlins, fencing, formwork |
Usually made of galvanized iron wire and similar in form to office stapler pins. Types are designated by an F, J, K, N or P prefix according to wire diameter. The standard collated staple for pneumatic stapling tools across furniture, upholstery, picture framing and packaging.
| Wire Type | F · J · K · N · P (by wire diameter) |
| Wire Diameter | Ø0.6 – 1.25 mm by type |
| Crown | Flat wire crown, rectangular section |
| Point | Chisel / divergent cut |
| Material & Finish | Galvanized iron wire, bright or copper-plated |
| Collating | Glue-collated strip, 50 / 100 staples |
| Applications | Furniture and upholstery, picture framing, carton and box closing, general joinery |
A T-shaped object made of 45# low-carbon steel, flat at one end and pointed at the other, collated with glue. Mainly for decorative fixing and connection, and also for hanging items — fired with an ST64 pneumatic gun instead of being hammered in.
| Wire Diameter | Ø2.2 mm |
| Head & Point | Flat head · sharp point |
| Wire Size | ST-18 / 25 / 32 / 38 / 45 / 50 / 57 / 64 |
| Wire Rod per Box | NUMBER / BOX 20 |
| Wire Rod per Container | NUMBER / BOX 400 |
| Material & Finish | 45# low-carbon steel, bright or galvanized |
| Tooling | ST64 pneumatic brad gun |
| Applications | Decorative fixing, light-duty connection, picture and sign hanging, joinery and trim work |
The most widely used general-purpose nail, with a round shank, flat head and diamond point. Sufficient for decoration, joinery and light timber construction — furniture makers, wooden packaging and hardware moulding works.
| Wire Gauge | F10 / 15 / 20 / 25 / 30 / 38 / 50 (10 – 50 mm) |
| Nails per Box | NUMBER / BOX 20 – 30 |
| Nails per Container | NUMBER / BOX 2000 |
| Head | Flat checkered (square) head |
| Point | Diamond / checkered |
| Material & Finish | Low-carbon steel wire, bright / hot-dip galvanized / stainless |
| Applications | Decoration, joinery, light timber construction, wooden packaging, hardware moulding |
Made from high-quality special steel and treated for high hardness and toughness. The point is specially quenched for high hardness in cement-based substrates — far better service life than ordinary nails.
| Wire Size | SIZE / SPECS |
| Diameter | Ø1.6 – 4.5 mm |
| Length | 16 – 100 mm |
| Material | High-quality special steel, hardened & tempered |
| Head | Flat / checkered head |
| Surface | Blued, bright or galvanized |
| Standards | GB/T 3098 · ASTM F1667 reference |
| Applications | Concrete, brick and masonry fixing, cement-sand components, formwork and frames |
Applications: decoration and finishing work, suitable for connecting hardwood and light-gauge steel studs. Suitable for hardwood, brick walls and cement-sand components. Widely used in civil and military building for electrical and plumbing fit-out and interior finishing.
| Wire Size | SIZE / SPECS |
| Diameter | Ø1.6 – 4.5 mm |
| Length | 16 – 100 mm |
| Material & Finish | Galvanized steel wire with colour-painted head & shank |
| Colour Options | Red, white, black, yellow and matched to RAL / Pantone |
| Head | Flat checkered head |
| Applications | Decoration, hardwood fixing, light steel studs, brick and cement-sand components, building fit-out |
Excellent hardness, hardness and bending resistance — widely used for floors, furniture manufacturing, home decoration, packaging and general site work.
| Specifications | 30 / 40 / 50 / 60 / 70 / 80 / 100 |
| Wire Gauge | Ø2.65 mm |
| Shank | Square or twisted, diamond point |
| Material & Finish | Low-carbon steel, bright or galvanized |
| Corrosion Resistance | Good — for interior and general construction |
| Applications | Floor and flooring fixing, furniture manufacturing, home decoration, packing, general building work |
Headless nails supplied in collated strips for powder-actuated fastening tools — the standard choice for fixing steel, angle iron and track into concrete and masonry. Used for decoration, joinery, light steel framing, woodworking, home decoration and site installation.
| Wire Size | SIZE / SPECS |
| Diameter | Ø2.8 – 3.6 mm |
| Length | 32 – 72 mm |
| Nails per Box | NUMBER / BOX 40 – 80 |
| Nails per Container | NUMBER / BOX 100 |
| Head | Headless, or red / yellow plastic washer head |
| Material & Finish | Hardened steel, bright or zinc-plated |
| Applications | Concrete and masonry fixing, light steel framing, decoration, joinery, site installation |
One of the current main products, alongside collated nails, straight nails, staples, drywall nails and special concrete nails. Part of a 15-series, 659-variety range built for one-stop sourcing, with an annual output above 7,000 tons.
| Specifications | 40 mm / 50 mm |
| Wire Gauge | Ø2.65 mm |
| Shank | Fine thread, countersunk head |
| Material & Finish | Zinc-plated steel with nylon plug |
| Packing | NUMBER / BOX 20 – 30, boxed with plugs |
| Applications | Decorative board, blockboard, wood-based panels, furniture manufacturing |
Its name is translated directly from the English "drywall screw", and its most distinctive visual feature is the bugle head. Available in double-thread fine-gauge and single-thread coarse-gauge versions — the key difference being that the former carries a double thread.
| Specifications | 16 / 25 / 30 / 40 / 50 |
| Wire Gauge | Ø2.65 mm |
| Head | Bugle head, round shoulder |
| Thread | Double-thread fine gauge / single-thread coarse gauge |
| Material | Hardened steel wire |
| Surface | Sandblasted surface, black / zinc-plated / stainless |
| Corrosion Resistance | Good — for interior wall and ceiling fixing to stone, board, wood and steel |
| Applications | Interior walls & ceilings, stone, board, wood and light steel fixing |
Send us your specification or drawing and we will quote against it.