Glue-Collated Brad Nails / Strip Nails
T-shape brad nails of 45# low-carbon steel with a flat head and sharp point, glue-collated for ST64 pneumatic brad guns — for decorative fixing, joinery and light-duty suspension.
A T-shaped object made of 45# low-carbon steel, flat at one end and pointed at the other, collated with glue. Mainly for decorative fixing and connection, and also for hanging items — fired with an ST64 pneumatic gun instead of being hammered in.
Collated brad nails leave virtually no visible head, which is why they are the default choice for decorative trim, sign mounting and light furniture assembly. The glue collation means a strip breaks cleanly at every nail, so there is no waste between shots. ST64 collation is the most common in the market; we can also quote ST57 and ST38 for lighter work.
Buying note: Glue-collated T-shape brad nails, 45# low-carbon steel, Ø2.2 mm shank, ST64 collation. Clean, fast fixing for decorative and light joinery work.
Collated steel nails (also called brad nails, T-nails or glue collated nails) are the high-volume fastener for industrial assembly. These are the typical buying scenarios:
Continuous brad nailing in frame and case furniture manufacturing.
Board-to-board nailing in industrial pallet and crate production.
Timber framing, roof trusses and general structural assembly.
Casework, shelving and fitted furniture production.
Panel retention and interior trim assembly.
Display board, backing panel and packaging assembly.
| Parameter | Specification |
|---|---|
| Nail type | T-shape / brad head, straight or twisted shank |
| Material | 45# low-carbon steel, 65# for higher hardness |
| Diameter | Ø2.2 mm, Ø2.5 mm, Ø2.8 mm, Ø3.1 mm |
| Length range | 20–110 mm (standard and special lengths on request) |
| Collation | Glue collated, ST64 / ST68 / ST72 strip codes |
| Compatible tools | Pneumatic brad guns (Bostitch, Stanley, Arrow and equivalent) |
All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.
Common questions we receive from overseas buyers of collated steel nails. If your question is not listed, send it to us and we will answer directly.
The collation code has to match the magazine on your tool — it is not interchangeable between models. ST64 is the most common 25-degree collation, ST68 and ST72 are also widely used. Send us the tool model or the strip code printed on the side of the magazine and we will supply the matching collation. We can also work from a photograph of the strip.
45# is low-carbon steel, used where the nail bends rather than breaks — general furniture, crates and interior work. 65# is harder and is specified where the fixing has to resist greater pull-out or where the nail must not bend, such as heavier timber framing or pallet work that will be handled roughly. If you are unsure, 45# is the safer choice for furniture and 65# for structural and heavy-duty assembly.
Yes, we supply container-load quantities for furniture and pallet manufacturers, with consistent collation and wire specification across the shipment so you do not need to re-adjust the tool mid-run. We can also supply sample cartons first so production can verify tool settings and penetration before the bulk order is released.
We also supply the complete range below from the same partner workshops — ask for a combined container quotation.
Wire StaplesGalvanized Wire Brad Staples
Straight NailsCommon Wire Nails
Special Cement NailsHardened Concrete / Masonry Nails
Paint Cement NailsPainted-Masonry Nails
Floor NailsSquare-Hardened Floor Nails
Concrete Shot NailsPowder-Actuated Concrete Nails
Eco Board NailsEco-Board / Melamine Board Screws
Drywall NailsHardened Drywall Nails