Home / Technical Guides

Technical guides for specifying steel the right way

Ten practical guides covering coating weights, standards, mill test certificates, tolerances, HS classification and container loading. Written from the mill side, so you get the specification a mill actually needs — and the arguments you avoid having at inspection.

Most steel import problems are not supply problems. They are specification problems — a coating weight quoted without a minimum, a standard named without the grade, a certificate type that was never agreed, or a tolerance clause that says "normal mill tolerance" and therefore means nothing.

These guides cover the decisions buyers actually have to get right, with the numbers and the standard references behind each one. Every table can be checked against the published standard, and every figure traces back to a conversion or a test rather than to a rule of thumb.

Coating selection

G60 vs G90 Galvanized Steel Coil

Which coating weight to specify — G and Z designations, full conversion table, ISO 9223 corrosion classes.

Read guide
Coating selection

Galvanized vs Galvalume Steel Coil

Zinc versus zinc-aluminium: coating composition, salt spray performance, service life and cost.

Read guide
Pre-painted coil

PPGI Paint Build-Up and Thickness

PE, HDP and PVDF systems compared, nominal versus total DFT, colour matching and formability.

Read guide
Roofing & cladding

Roofing Material Selection by Climate

GI, PPGI, galvalume and aluminium compared across hot-humid, desert, coastal and temperate zones.

Read guide
Seamless pipe

API 5L vs ASTM A106 Seamless Pipe

Grade ranges, testing requirements, pipe marking and which standard to specify by project type.

Read guide
Quality & inspection

How to Read a Mill Test Certificate

EN 10204 3.1 versus 3.2, what each section proves, and a verification checklist to run on receipt.

Read guide
Standards

ASTM vs EN vs JIS Standards

A cross-reference table so one purchase order can be read across three numbering systems.

Read guide
Specifications

Steel Coil Tolerance Guide

Thickness, width, flatness and edge condition tolerances, and how to write an enforceable clause.

Read guide
Logistics

HS Code and Container Planning

HS classification for coil, full-cube stowage planning and the customs document set.

Read guide
Logistics

Coil Weight and Packing Calculation

Calculate coil weight from dimensions, convert to container payload and plan the stowage.

Read guide

How to use these guides

  • Before you order — the coating and standards guides tell you what to specify so you are not negotiating from a position of ignorance when the mill quotes back.
  • Before you ship — the MTC and HS code guides tell you what to check, and when, so problems surface before the container is sealed rather than after it lands.
  • At inspection — the tolerance guide gives you the clause language that makes a dispute enforceable, because "mill standard" is not a defensible position.

Each guide cross-links to the products it covers, so you can move from a technical question straight to a specification sheet and a quote.

Need help specifying your material?

Send grade, thickness, width, coating and quantity. We confirm mill availability and return a proforma with the applicable standard and delivery window — normally within one business day.

Request a Quote