Steel coil HS code and container planning: a practical customs guide

Two questions decide whether a steel shipment clears without delay: what code the cargo is declared under, and how the load is planned into the container. Both are settled before the vessel sails, and both are much harder to fix afterwards. This guide covers the HS classification that applies to steel coil and the practical arithmetic of coil weight, container limits and stowage.

HS classification for the products we ship

The international six-digit HS code is harmonised worldwide, which makes the classification straightforward at the heading level. The complexity is always in the national lines below it:

Product HS heading International description Practical note
Hot rolled steel coil, uncoated72087210 – flat products of iron or non-alloy steel, hot-rolledWidely used; check the national tariff line for width and thickness breakdown
Cold rolled steel coil, uncoated72097210 – flat products, cold-rolledCheck whether the national schedule separates by width band
Hot-dip galvanized steel coil72107210 – hot-rolled, plated or coated with zincGalvanized falls under the coated sub-heading
Galvalume / ALU-ZINC coated coil72107210 – coated with zinc and aluminium alloysOften classified with the galvanized line; confirm with your broker
Pre-painted steel coil (PPGI / PPGL)72107210 – coated with other materials (paint, plastic, lacquer)Colour is not a separate line in most schedules
Seamless steel pipe73067306 – tubes, pipes and hollow profiles of iron or steelThe line may split by alloy content and by standard

Two practical warnings. First, colour is not a separate tariff line — PPGI and PPGL are distinguished by their base material and coating type, not by the paint. Second, the ten-digit national code governs and it differs by market. Always confirm the destination-specific code with the broker before the vessel sails.

Why the national tariff line matters more than the HS code

The six-digit code determines what the product is in the eyes of customs worldwide. The eight or ten-digit national code determines what it costs to import. Duty rates, preferential treatment, safeguard measures and trade defence duties all attach to the national line. The same coil entering the UAE and Indonesia under the same international heading can face materially different effective duty rates, and in some cases one of them faces a trade defence measure and the other does not.

This is the practical reason behind our quotation structure: we quote FOB and CFR separately rather than quoting a single delivered number, so the duty remains visible as a separate line that your broker can confirm. A delivered price with duty bundled in hides the thing most likely to change.

Container planning and the full-cube stowage discipline

Coil is a dense cylinder with air at the core, and how it is loaded determines how much of the container is actually used:

Container type Typical gross payload limit Usable volume Coil loading guide Typical use
20ft standard≈ 28 tonnes gross payload limit≈ 33 m³ usableRoughly 15–18 tonnes of coil on a 0.5 mm baseSmaller shipments, coastal and regional delivery
40ft standard≈ 26–28 tonnes gross payload limit≈ 67 m³ usableRoughly 26–28 tonnes of coil on a 0.5 mm baseThe standard full-cube coil shipment
40ft high cube≈ 26–28 tonnes gross payload limit≈ 76 m³ usableMore height, useful for taller profilesPainted and profiled sheet where cube is limiting

The full-cube stowage discipline means the coil is positioned so every part of the container carries load — the eye oriented to match the door loading angle, coils supported so the stack does not bear on the curvature, and the weight distributed so the container does not exceed axle limits. The practical result is a full 26 to 28 tonne payload on a 40ft. A loosely stowed container can lose half a tonne to air, which at current steel prices is a meaningful part of the cargo value and entirely within the supplier's control.

We shoot the loading and stowage and supply the photographs and video, and can arrange third-party inspection at SGS, BV, CCIC or Intertek before loading. See the coil weight and packing calculation guide for the arithmetic.

The customs document set

Prepare this before the vessel sails — every item, because a missing document holds the container and the demurrage does not wait:

  • Commercial invoice — with the exact HS code and the full product description including grade, thickness, width and coating.
  • Packing list — coil number, net and gross weight, dimensions, and the total for the shipment.
  • Bill of lading or sea waybill — with the HS description matching the invoice.
  • Mill test certificate — EN 10204 3.1 or 3.2 as specified, one per heat, with a consolidated index.
  • Certificate of origin — required where a preferential duty rate is claimed.
  • Certificate of weight — where the buyer pays by actual weight.
  • Fumigation certificate — for any timber packaging, required for several destinations.
  • Conformity certificate — where the destination market requires a local conformity mark on steel products.

One point specific to a trading arrangement, which is our situation: the mill certificate and the exporter invoice must be internally consistent in grade, description, dimensions and weight. Customs compares the two, and where they disagree the container stops. We reconcile the certificate against the invoice before shipment for exactly this reason.

Duty, trade defence and why we quote FOB and CFR separately

Steel is one of the most heavily protected product categories in most importing markets. On top of the base tariff rate, a trade defence measure may apply — an anti-dumping or countervailing duty specific to the exporting country and often to a specific exporter. The effective rate can change materially depending on whether a preferential certificate of origin is available and whether the exporter has a specific rate.

Because of this we quote FOB and CFR separately and leave duty as an explicit line for the buyer's broker to confirm. If you need a fully delivered price, we can provide one once the broker confirms the applicable rate for the specific code and origin — that is the honest way to do it, because it puts the one number that can change into the column where it belongs.

Frequently asked questions

What is the HS code for hot rolled steel coil?

Hot rolled steel coil falls under heading 7208 at the four-digit international level, and in the expanded eight or ten-digit national tariff lines it normally sits under 7210 as hot-rolled flat products of iron or non-alloy steel. The national line is where the actual duty rate lives, and in several markets it splits further by width and thickness. The international six-digit code is the same worldwide, but the duty rate, the preferential treatment and the statistical reporting all follow the national line — which is why a code that is correct for the UAE can be wrong for Indonesia. Confirm the ten-digit code for the destination country with your broker before the cargo ships, not after it arrives.

Are galvanized and galvalume coil classified under the same code?

Usually, yes — both are coated flat products and normally sit under the same coated sub-heading of 7210. But "usually" is doing real work in that sentence, because the coated sub-heading can split by the coating composition and by whether the coating is paint or metal. A galvalume coil with a 55% aluminium-zinc alloy coating can be classified differently from a hot-dip galvanized coil at national tariff level, and some countries treat pre-painted material in yet another line. This is worth confirming per shipment, and it is worth asking the broker for the ruling in writing before the cargo moves if the value is significant.

How many tonnes of coil fit in a 40ft container?

Around 26 to 28 tonnes for the standard coil configuration, and this is where the full-cube stowage discipline pays off. A coil is a dense cylinder with air trapped at the core, and a poorly stowed container can leave half a tonne of usable volume empty. Full-cube stowage means the coil is positioned so every part of the container is load-bearing — typically achieved by pairing coils with the eye oriented to match the door loading angle and supporting them so the stack does not sit on the curvature. That discipline is why we quote the delivered price rather than the ex-works price, and it is why the same steel can differ by a full tonne between suppliers.

What documents do customs need with a coil shipment?

The core set is: commercial invoice with the exact HS code and the full product description, packing list showing coil number, weight and dimensions, bill of lading or sea waybill, mill test certificate to EN 10204 3.1 or 3.2 as specified, and the certificate of origin where a preferential rate is claimed. Depending on the destination you may also need a conformity certificate, a fumigation certificate for timber packaging, and a certificate of weight. Where the mill is not the exporter — which is our situation as a trading company — the relationship between the mill certificate and the exporter invoice has to be internally consistent, because customs will compare the description, the grade and the weight on both documents.

Does the HS code affect the duty rate?

Yes, and in a steel shipment the duty rate can be the difference between a viable order and an unviable one. Steel is among the most heavily protected product categories in most importing markets, and the rate varies by HS line, by country and often by preferential agreement. A trade defence measure — anti-dumping or countervailing duty — may apply on top of the base rate and is specific to the exporting country, so the same shipment can face a completely different effective rate depending on the origin and the certificate of origin held. Before quoting a delivered price, confirm the applicable rate with your broker for the exact code and the exact origin. This is also why we quote FOB and CFR separately rather than bundling everything into one number — see our coil weight and packing guide for the loading detail.

Is there a difference between the exporter HS code and the importer code?

Usually not — the HS code is international and both sides use the same classification. What differs is the tariff line number below the six-digit level, the applied duty rate, the preferential treatment and the statistical reporting requirements. In practice the exporter declares the code and the importer checks it against their own national schedule. A mismatch triggers a customs query, which holds the container, and the demurrage is charged to whoever cannot produce the paperwork. Getting the code confirmed before loading is cheap insurance.

Need help specifying your material?

Send grade, thickness, width, coating and quantity. We confirm mill availability and return a proforma with the applicable standard and delivery window — normally within one business day.

Request a Quote