Hot rolled steel coil (HRC) supplier in China — mill-direct Q195/Q235B, SS400, A36, S235JR and SPHC grades, 1.2–25.0 mm thickness, 600–2000 mm width, 5–28 ton coils with EN 10204 3.1 MTC and SGS inspection.
The table below reflects the standard supply range. We also work to fully custom specifications — grade, thickness, width, coating, surface treatment, coil weight and packing are all confirmed against your mill schedule before quotation.
| Thickness | 1.2 mm – 25.0 mm |
| Width | 600 – 2000 mm (slitting available) |
| Coil ID / Weight | Ø 508 / 610 mm · 5 – 28 tons |
| Standards | GB/T 3274, JIS G3101, ASTM A36 / A1011, EN 10025 |
| Surface | Black / pickled & oiled (P&O) |
| Applications | Structural steel, pipe & tube making, shipbuilding, bridges, automotive frames, general fabrication |
Every order ships with an EN 10204 type 3.1 mill test certificate matched to the heat number on the packing list. Type 3.2 certification and third-party inspection (SGS, BV, TUV or Intertek) are available on request at buyer nomination, with the inspection report tied to the shipment.
Our ISO 9001 quality management system covers sourcing, production supervision, loading inspection and export documentation. Material is verified against the mill certificate at loading rather than after it reaches your yard, so certificate and cargo stay consistent through the document set.
Send grade, thickness, width, coating, quantity in metric tons and your destination port. We confirm feasibility with the mill and return a proforma naming the mill, the applicable standard and the delivery window — normally within one business day. Payment terms are T/T 30% deposit with the balance against the bill of lading copy, or letter of credit at sight.
Hot rolled steel coil (HRC) is the workhorse of structural steel fabrication and the widest-tonnage coil we supply. These are the typical buying scenarios for buyers specifying HRC, who usually need to confirm grade, thickness and width against the end use and the fabrication route.
HRC is the raw material for hot rolled sections, beams, channels, angles and plate. Fabrication shops buy HRC to be cut, welded and rolled into members, so the key checks are yield strength, thickness tolerance and surface quality.
Spiral and longitudinal welded pipe mills run HRC as coil feed, usually in narrow widths matched to the pipe diameter. Grade and yield strength must match the pipe standard being produced, not the mill standard of the coil.
Hot rolled coil is cut and blanked into chassis and body components. Buyers here specify formability grades such as Q235 / S235 / A36 and check surface condition, because coil scale affects downstream press tooling.
AH36, DH36 and other marine grades are supplied as hot rolled plate and coil for hull and deck fabrication, normally with classification society certificates attached.
Line pipe grade coil is slit and welded into pipe for oil, gas and water transmission, usually to API 5L or equivalent, with the coil heat number tied to the finished pipe documentation.
Industrial frames, storage racking, conveyor structures and general fabrication work are commonly cut from HRC, where buyers focus on price per tonne against the grade actually required by the drawing.
| Parameter | Specification |
|---|---|
| Steel grade | Q235B / Q275B / Q355B, S235JR / S355JR, ASTM A36, SAE 1006/1010 |
| Thickness | 1.6 - 16.0 mm (common stock 2.0 - 12.0 mm) |
| Width | 1000 - 2500 mm (slit widths from 200 mm on request) |
| Coil weight | 10 - 25 tonnes per coil, up to 30 tonnes on mill route |
| Edge | Mill edge or sheared edge; trimmed edge on request |
| Surface | Hot rolled, pickled and oiled, or pickled and shot-blasted |
| Standards | GB/T 3524, JIS G3101, EN 10025, ASTM A36, API 5L grades |
| Documentation | EN 10204 3.1 certificate, mill test report on request |
Grade, thickness and width are confirmed against the mill certificate and the order acknowledgement. Tell us the grade, thickness, width, coil weight and destination port and we will quote the exact specification - or send us the drawing or the standard you work to and we will match it.
One 20ft container is the usual minimum, which is roughly 20–25 tons depending on thickness. Smaller trial quantities can be arranged for first orders against a confirmed mill schedule.
Yes. Pickled and oiled (P&O) is available on request for grades where the mill line supports it — confirm the pickling line and delivery window when you send your specification.
Mill test certificates are issued to EN 10204 type 3.1 as standard. Type 3.2 certification is available on request at the time of order, with third-party inspection (SGS, BV, TUV or Intertek) supported at your nomination.
Yes. For pipe-making and slitting customers we supply to the coil weight and ID your line requires, so you avoid re-coiling on arrival.
The most ordered thickness is 2.0 to 12.0 mm, which covers the majority of fabrication and pipe feed work. Below 1.6 mm and above 16.0 mm we source to order rather than from stock, and that normally adds 5 to 10 days to the lead time. If you tell us the thickness and width you need we can tell you immediately which is in stock and what has to be ordered from the mill.
Yes. We slit HRC to your required width, from 200 mm upwards, and can supply it as slit coil or as cut-to-length sheet. For pipe feed we match the coil width to the pipe diameter and provide the coil weight your line runs on. Send us the width, thickness, grade and your monthly volume and we will confirm the slitting plan and price.
Every coil ships with an EN 10204 3.1 mill test certificate showing the heat number, the chemical composition and the mechanical values. The heat number is marked on the coil and repeated on the packing list, so it can be traced from the certificate to the physical coil through the whole shipment. For pipe feed and pressure applications we also align the heat number with the finished pipe documentation.
Reference material on coating selection, product comparison and shipment planning.
Mill-confirmed availability, EN 10204 3.1 MTC with every order, and inspection support at your nomination.