Mill-direct steel coils, pipes & fasteners — export to 60+ countries
Home/Products/Eco Board Nails
Product 20 of 21 · Nails & Screws

Eco Board
Nails

Eco-Board / Melamine Board Screws

Designed for fixing decorative board, blockboard and wood-based panels, supplied with white nylon plugs for a clean, invisible finish on furniture and interior fit-out.

40 mm 50 mm Ø2.65 mm Nylon Plug Set
Eco Board Nails

About Eco Board Nails

One of the current main products, alongside collated nails, straight nails, staples, drywall nails and special concrete nails. Part of a 15-series, 659-variety range built for one-stop sourcing, with an annual output above 7,000 tons.

Note: Kit: shipped boxed with matching white nylon plugs as a complete fixing set.

Why buyers choose this line

  • Mill-direct pricing from an established export trading company in Shijiazhuang, Hebei.
  • Full specification flexibility — most sizes, grades and finishes supplied to your size program.
  • Mill test certificate and third-party SGS / BV inspection available on every lot.
  • Export-standard seaworthy packing; 20GP and 40HC loading optimized.
  • Flexible payment: T/T, L/C at sight and D/P accepted.

Where Eco Board Nails are used

Eco board and melamine board fixings are a two-part system: the screw bites into the board, and the matching white nylon plug covers the head so the fixing disappears into the panel. This is the standard detail for shopfitting, furniture and interior fit-out, where a visible screw head would spoil the finish. We supply the plugs in white and can match other board colours on request.

Buying note: Eco-board and melamine board screws, 40 / 50 mm, supplied with white nylon plugs for an invisible finish on panels and fit-out.

Buyer Questions

Where eco-board nails are used

Eco-board nails (also called melamine board screws, particle board screws or confirmat screws) are the specialist screw for man-made boards. These are the typical buying scenarios:

Melamine and particle board

The core application — joining melamine, particle board, MDF and blockwork panels in furniture and fit-out.

Flat-pack furniture assembly

Confirmat-style screws for knock-down and flat-pack furniture production lines.

Cabinet and joinery work

Casework, shelving, carcass assembly and shopfitting where board-to-board fixing is needed.

Partition and wall panel systems

Fixing melamine-faced panels and office partition systems to frames.

Light furniture production

Where a nylon plug is needed to give a secure hold in low-density board.

Display and retail fittings

Shopfitting, exhibition stands and display units built from engineered board.

Typical specifications

ParameterSpecification
Head typeConfirmat (flat countersunk) head with a nylon plug
DiameterØ2.65 mm, Ø3.0 mm, Ø3.5 mm (with nylon plug)
Length range40 mm and 50 mm (other lengths on request)
MaterialHardened steel, zinc-plated, black phosphate or A2 stainless
PlugNylon expansion plug supplied as standard
DrivePozi / Torx / Phillips (cross recess as specified)

All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.

Frequently Asked Questions

Common questions we receive from overseas buyers of eco board nails. If your question is not listed, send it to us and we will answer directly.

What is included in the box?
The screws and the matching white nylon plugs, packed together as a complete fixing set so nothing is missing on site.
What sizes do you supply?
40mm and 50mm lengths on Ø2.65mm wire, with a fine thread and countersunk head.
What are these used for?
Decorative board, blockboard and wood-based panel fixing — the standard choice for furniture manufacturers and woodworking trades.
Can you pack for retail?
Yes, we can pack into smaller cartons for hardware retail and dealer distribution.

Frequently asked questions

What is an eco-board nail and when do I need one?

An eco-board nail is a confirmat screw with a nylon expansion plug designed for melamine, particle board and other low-density engineered boards. Ordinary wood screws split these boards because they have no expansion component — the nylon plug spreads the load inside the board and prevents pull-out. If you are building furniture or fit-out from engineered board, this is the correct fastener; for solid timber, a standard wood screw is stronger and cheaper.

What length eco-board nail do I need for 16 mm melamine board?

For 16 mm melamine or particle board, 40 mm is the standard length and it is the size most furniture factories specify. 50 mm is used where you are fixing into a thicker panel, into a frame edge, or where extra grip in the board edge is needed. The nylon plug length is what determines the holding power, so the board thickness matters more than the screw length.

Are eco-board nails available in stainless steel?

Yes, A2 stainless is available in 40 mm and 50 mm on the same Ø2.65 mm shank with nylon plug. For outdoor applications, wet rooms, coastal projects or any case where the joint will be exposed to moisture, stainless is the right choice over zinc-plated. Black phosphate is the usual finish for interior furniture where appearance matters.

More From This Range

Related Nails & Screws

We also supply the complete range below from the same partner workshops — ask for a combined container quotation.

Browse also: Wire StaplesCollated Steel NailsStraight NailsSpecial Cement NailsPaint Cement NailsFloor NailsConcrete Shot NailsDrywall Nails