Galvanized Wire Brad Staples
Galvanized wire staples in F, J, K, N and P gauges — the standard collated staple for pneumatic stapling tools in furniture, upholstery, picture framing and carton closing.
Usually made of galvanized iron wire and similar in form to office stapler pins. Types are designated by an F, J, K, N or P prefix according to wire diameter. The standard collated staple for pneumatic stapling tools across furniture, upholstery, picture framing and packaging.
Wire staples are the lowest-cost way to fix fabric, mesh or thin sheet to a frame without splitting the substrate. We supply the F, J, K, N and P gauge families, so you can match an existing gun without changing tooling. Staples are packed by wire gauge and leg length, and a 40HC holds roughly 1,100 cartons.
Buying note: Galvanised wire staples in F / J / K / N / P wire gauges, loaded for pneumatic staple guns. Used where a flat, low-profile fixing is needed in furniture, upholstery and packaging.
Wire brad staples are the light-gauge fastener for upholstery, picture framing and light assembly. These are the typical buying scenarios:
Stapling webbing and fabric to seat and furniture frames.
Backing boards, matting and frame assembly.
Cabinet backs, drawer bottoms and light joinery.
Trim and lining retention in automotive applications.
Retail display boards and hanger attachment.
Sole assembly in footwear and leather goods production.
| Parameter | Specification |
|---|---|
| Wire gauge | F, J, K, N and P (18–24 gauge) |
| Leg length | 6–38 mm (standard range, others on request) |
| Wire type | Galvanized iron, stainless A2 or A4, or bright wire |
| Crown | 10 mm, 12.7 mm and 13 mm crown widths |
| Collation | Collated strips for pneumatic tools, or loose staples |
| Compatible tools | Pneumatic staple guns, T50 / 140 series types |
All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.
Common questions we receive from overseas buyers of wire staples. If your question is not listed, send it to us and we will answer directly.
For upholstery webbing onto hardwood or plywood frames, the common specification is 6–10 mm leg in F or J gauge, driven with a T50-type pneumatic gun. Thicker 8–12 mm staples are used where extra holding is needed on soft or fibrous frames. The gauge is largely a tool-compatibility decision — the gun model determines which staple it will fire.
Yes, A2 and A4 stainless in the same leg lengths and crown widths as the galvanized range. Stainless is the correct specification for outdoor furniture, marine applications, food-contact or hygiene environments, and anywhere salt spray is a factor. For standard indoor furniture work, galvanized iron is more economical and fully adequate.
Yes, we supply collated in the standard strip types used by T50 and 140 series pneumatic guns, and we can match other collation codes if you send the strip code or a photo of the magazine. Bulk boxes of loose staples are also available for manual staplers and low-volume workshop use.
We also supply the complete range below from the same partner workshops — ask for a combined container quotation.
Collated Steel NailsGlue-Collated Brad Nails / Strip Nails
Straight NailsCommon Wire Nails
Special Cement NailsHardened Concrete / Masonry Nails
Paint Cement NailsPainted-Masonry Nails
Floor NailsSquare-Hardened Floor Nails
Concrete Shot NailsPowder-Actuated Concrete Nails
Eco Board NailsEco-Board / Melamine Board Screws
Drywall NailsHardened Drywall Nails