Mill-direct steel coils, pipes & fasteners — export to 60+ countries
Home/Products/Concrete Shot Nails
Product 19 of 21 · Nails & Screws

Concrete
Shot Nails

Powder-Actuated Concrete Nails

Headless nails supplied in collated strips for powder-actuated fastening tools — the standard choice for fixing steel, angle iron and track into concrete and masonry.

Ø2.8–3.6 mm 32–72 mm Strip / Collated Washer Head Option
Concrete Shot Nails

About Concrete Shot Nails

Headless nails supplied in collated strips for powder-actuated fastening tools — the standard choice for fixing steel, angle iron and track into concrete and masonry. Used for decoration, joinery, light steel framing, woodworking, home decoration and site installation.

Note: Warning: must be fired with a matched powder-actuated tool and wearing appropriate PPE. We supply the correct load strip for your gun on request.

Why buyers choose this line

  • Mill-direct pricing from an established export trading company in Shijiazhuang, Hebei.
  • Full specification flexibility — most sizes, grades and finishes supplied to your size program.
  • Mill test certificate and third-party SGS / BV inspection available on every lot.
  • Export-standard seaworthy packing; 20GP and 40HC loading optimized.
  • Flexible payment: T/T, L/C at sight and D/P accepted.

Where Concrete Shot Nails are used

Concrete shot nails are loaded into strips or coils for pneumatic shoot-nail guns, which is how most formwork, lath and framing is fixed on site. Because they are fired rather than hammered, the collation and the strip count have to match the gun magazine exactly — getting that wrong is the most common cause of a jam, so tell us your gun model and we will match the collation. We supply 40 to 80 nails per strip.

Buying note: Strip- and coil-loaded concrete nails, Ø2.8–3.6 mm, 32–72 mm, for shoot-nail guns fixing to concrete and steel.

Buyer Questions

Where concrete shot nails are used

Concrete shot nails (also called concrete nails, power-actuated nails or drive pins) are the standard fastener for fixing steel to concrete. These are the typical buying scenarios for buyers who already know the nail type but need to specify it correctly:

Steel framing to concrete

Fixing steel track, angle iron and base plates to poured concrete or precast panels. The most common use for Ø2.8–3.6 mm drive pins.

Metal strapping and banding

Securing strapping, banding and edge protection to concrete floors and columns in warehouses and plants.

Electrical conduit and trunking

Fixing conduit brackets, trunking and cable trays to concrete walls and soffits.

Hangers and supports

Threaded rod hangers, ducting supports and pipe clamps anchored to concrete.

Precast panel fixing

Pinning precast wall panels and facade elements to concrete substrates.

Formwork and shuttering

Securing formwork and timber shutters to concrete soffits and walls.

Typical specifications

ParameterSpecification
Head typeHeadless (no head), smooth shank — for flush driving
DiameterØ2.8 mm, Ø3.0 mm, Ø3.4 mm, Ø3.6 mm
Length range32–72 mm (other lengths on request)
MaterialHardened carbon steel, zinc-plated or hot-dip galvanized
Collation25–57 strips (collated for automatic tools)
Compatible toolsPowder-actuated nail guns for Ø2.8–3.6 mm drive pins

All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.

Frequently Asked Questions

Common questions we receive from overseas buyers of concrete shot nails. If your question is not listed, send it to us and we will answer directly.

What size shot nail should I use?
The diameter and length depend on the base material and the load, and must match your tool's power rating. Send us the substrate and the thickness you are fixing and we will confirm the correct specification.
What does the washer head do?
A plastic washer head spreads the bearing load and leaves a finished, painted-looking surface, which is why it is often specified for exposed fixing.
How are they packed?
Collated strips, 40 to 80 nails per box and 100 boxes per 40HC container.
Are there safety requirements?
Yes — these must only be fired with a matched powder-actuated tool and appropriate PPE, and local site safety rules apply. We supply the correct load strip for your gun on request.

Frequently asked questions

What is the difference between concrete shot nails and ordinary masonry nails?

Concrete shot nails are driven by powder-actuated tools rather than struck with a hammer, so the shank is hardened and often headed or collated for automatic feeding. Ordinary masonry nails are softer, thinner and hand-driven. If your application involves fixing steel into concrete on site, shot nails hold better and install far faster because the tool does the work.

Which shot nail diameter should I specify for steel framing?

For standard steel track and angle fixings into concrete, Ø2.8 mm drive pins at 32–50 mm length are the normal specification. Ø3.4–3.6 mm pins are used where higher pull-out resistance is needed or the base material is dense precast concrete. The deciding factor is the base material and the load, not the fixing in itself — tell us the base material and we will confirm the gauge and length against the tool you use.

Can you supply shot nails collated for my specific nail gun?

Yes. We supply in standard 25 and 57 strip collations, and can match other collation codes on request if you tell us the strip code or send a photo of the magazine. We also supply in bulk boxes of 1,000 pieces for high-volume framing work. Send your tool model or strip code and we will confirm compatibility before production.

More From This Range

Related Nails & Screws

We also supply the complete range below from the same partner workshops — ask for a combined container quotation.

Browse also: Wire StaplesCollated Steel NailsStraight NailsSpecial Cement NailsPaint Cement NailsFloor NailsEco Board NailsDrywall Nails