Common Wire Nails
The most widely used general-purpose nail — a plain round wire shank with a flat head and diamond point, for timber frames, packing crates, pallets and furniture assembly.
The most widely used general-purpose nail, with a round shank, flat head and diamond point. Sufficient for decoration, joinery and light timber construction — furniture makers, wooden packaging and hardware moulding works.
Straight nails are the workhorse of the fastener range and account for the largest share of our container volume. We ship them in 20–30 kg cartons with the wire diameter and length marked on the head, and can mix several lengths in one container to match a customer packing list. Copper-plated and stainless grades are available where corrosion is the concern.
Buying note: Common wire nails F10–F50 in bright, zinc-plated, copper-plated and stainless steel. The general-purpose nail for framing, formwork and packaging.
Straight nails (also called common wire nails, bright nails or wire nails) are the general-purpose wire nail for softwood. These are the typical buying scenarios:
Everyday nailing in softwood framing, battens and general carpentry.
Board assembly in pallet and crate production.
Fixing timber to timber in formwork and temporary works.
Fence rails, posts and timber garden structures into softwood.
Case and crate assembly, strapping and closure.
Fixing roofing battens, fascia and general site timber work.
| Parameter | Specification |
|---|---|
| Head type | Flat checkered head, diamond point shank |
| Wire gauge | F10 to F30 (1.0–4.2 mm diameter) |
| Length range | 25–150 mm |
| Material | Low-carbon steel wire |
| Finish | Bright, hot-dip galvanized, electro-galvanized or stainless |
| Shank | Smooth, twisted or ring-shank |
All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.
Common questions we receive from overseas buyers of straight nails. If your question is not listed, send it to us and we will answer directly.
F refers to the Birmingham gauge system for wire nails, where a lower number means thicker wire. F10 is roughly 3.4 mm diameter, F20 about 2.6 mm, and F30 about 1.8 mm. It is the quickest way for a buyer to specify thickness without needing to know the metric diameter, but if you are used to metric sizing, tell us the diameter and we will quote the closest gauge and confirm the actual wire diameter on the certificate.
Use hot-dip galvanized for anything exposed to weather or moisture, or where the nails will be in contact with treated timber. Bright nails are fine for fully interior, dry applications and are the cheaper option. For coastal or marine exposure, or for treated timber, specify stainless instead — hot-dip galvanized will show surface rust in salt-laden air even though it protects the steel underneath.
Yes, we supply coils for coil-nailers and collated strips for pneumatic brad guns, as well as loose nails in boxes. Tell us which tool you use and the coil or strip code on the magazine and we will match it. Bulk quantities for pallet and crate production are available with consistent wire specification across the shipment.
We also supply the complete range below from the same partner workshops — ask for a combined container quotation.
Wire StaplesGalvanized Wire Brad Staples
Collated Steel NailsGlue-Collated Brad Nails / Strip Nails
Special Cement NailsHardened Concrete / Masonry Nails
Paint Cement NailsPainted-Masonry Nails
Floor NailsSquare-Hardened Floor Nails
Concrete Shot NailsPowder-Actuated Concrete Nails
Eco Board NailsEco-Board / Melamine Board Screws
Drywall NailsHardened Drywall Nails