Painted-Masonry Nails
Galvanized nails with a painted head and shank for decoration and finishing work — fixing hardwood, light steel studs, brick and cement-sand components, widely used in building fit-out and utility installation.
Applications: decoration and finishing work, suitable for connecting hardwood and light-gauge steel studs. Suitable for hardwood, brick walls and cement-sand components. Widely used in civil and military building for electrical and plumbing fit-out and interior finishing.
Paint cement nails are the same hardened masonry body as our special cement range, with a polymer coating applied in the requested RAL colour so the fixing does not show on finished facades. The coating also adds a layer of corrosion protection, which is useful in coastal or damp environments. Common architectural colours are white, black, silver and grey, and we can produce a colour sample before a full order.
Buying note: Colour-coated masonry nails, Ø1.6–4.5 mm, with RAL colour matching on request. Same hardened body, finished for architectural work.
Paint cement nails are colour-finished hardened nails for decoration and fit-out where the fastener will be visible. These are the typical buying scenarios:
Fixing painted timber trim to masonry and concrete where the nail head is visible.
Decorative nailing in interior fit-out where galvanised nails would mark the timber.
Fixing painted battens, edgings and decorative timber in external landscaping.
Decorative timber screens and shutters where the fixing is on show.
Visible fixings in finished furniture and framed panels.
Final-stage nailing where colour consistency across the job matters.
| Parameter | Specification |
|---|---|
| Head type | Flat checkered head, twin ridge or round head |
| Diameter | Ø1.6 mm, Ø2.0 mm, Ø2.5 mm, Ø3.0 mm, Ø3.4 mm, Ø4.5 mm |
| Length range | 16–100 mm (standard and special lengths on request) |
| Material | Hardened steel core, PVC or polyester paint finish |
| Colours | White, black, brown, grey and matched to RAL / SSAB on request |
| Salt spray | Minimum 500 hrs (1000 hrs on request with upgraded coating) |
All figures are produced to the mill standard you specify and are confirmed on the mill test certificate. Tell us the grade, diameter, length and finish you need and we will quote the exact specification — or send us a drawing or a sample and we will match it.
Common questions we receive from overseas buyers of paint cement nails. If your question is not listed, send it to us and we will answer directly.
We match to a RAL or SSAB reference for larger projects, and can also match from a physical sample or a spectrophotometer reading. Send the colour reference with your order and we will produce a coated sample for approval before running the full batch — coating batches do vary slightly in tone, so approving a sample from the actual production run avoids surprises on site.
Standard painted cement nails are suited to internal and sheltered applications. For exposed outdoor use, specify the upgraded coating with a minimum 1,000-hour salt spray rating, or ask for hot-dip galvanized underneath with paint on top for the longest service life. Tell us whether the fixings are internal, sheltered or fully exposed and we will specify accordingly.
For fixing timber skirting or architrave to brickwork or blockwork, Ø2.5–3.0 mm at 40–60 mm is the normal specification. Go heavier on dense block or engineering brick, because the pull-out resistance is governed by the substrate rather than the timber. We can also supply the matching head size so the fixing line looks consistent.
We also supply the complete range below from the same partner workshops — ask for a combined container quotation.
Wire StaplesGalvanized Wire Brad Staples
Collated Steel NailsGlue-Collated Brad Nails / Strip Nails
Straight NailsCommon Wire Nails
Special Cement NailsHardened Concrete / Masonry Nails
Floor NailsSquare-Hardened Floor Nails
Concrete Shot NailsPowder-Actuated Concrete Nails
Eco Board NailsEco-Board / Melamine Board Screws
Drywall NailsHardened Drywall Nails