Home / Products / Cold Rolled Steel Coil

Cold Rolled Steel Coil Supplier & Manufacturer in China

Cold rolled steel coil (CRC) supplier in China — SPCC/SPCD, DC01/DC03, 08Al and Q195-Q235 grades, 0.15–3.2 mm thickness, tight tolerance and smooth surface for precision stamping, with MTC and third-party inspection.

SPCC SPCD DC01 DC03 08Al Q195–Q235
Cold Rolled Steel Coil supplied by Shijiazhuang Yangping, mill-direct export

Technical specifications

The table below reflects the standard supply range. We also work to fully custom specifications — grade, thickness, width, coating, surface treatment, coil weight and packing are all confirmed against your mill schedule before quotation.

Thickness0.15 mm – 3.2 mm
Width600 – 1800 mm
Coil ID / WeightØ 508 / 610 mm · up to 18 tons
StandardsJIS G3141, EN 10130, GB/T 5213, ASTM A1008
Surface / FinishBright / matte, lightly oiled or dry
ApplicationsPrecision stamping, home appliances, automotive panels, furniture, electrical enclosures

Quality, inspection and documentation

Every order ships with an EN 10204 type 3.1 mill test certificate matched to the heat number on the packing list. Type 3.2 certification and third-party inspection (SGS, BV, TUV or Intertek) are available on request at buyer nomination, with the inspection report tied to the shipment.

Our ISO 9001 quality management system covers sourcing, production supervision, loading inspection and export documentation. Material is verified against the mill certificate at loading rather than after it reaches your yard, so certificate and cargo stay consistent through the document set.

How to order

Send grade, thickness, width, coating, quantity in metric tons and your destination port. We confirm feasibility with the mill and return a proforma naming the mill, the applicable standard and the delivery window — normally within one business day. Payment terms are T/T 30% deposit with the balance against the bill of lading copy, or letter of credit at sight.

Where cold rolled steel coil is used

Cold rolled steel coil (CRC) is the smooth, precision-finished material used where a clean surface and tight tolerance matter more than structural strength. These are the typical buying scenarios for buyers specifying CRC, who normally need to confirm grade, temper and surface condition.

Automotive body panels and stampings

CRC is the base material for automotive body panels, doors and stampings, in deep-drawing grades DC01 to DC04 and high-strength grades with specific yield points for the press shop.

Home appliance and furniture panels

Appliance casings, refrigerator panels, microwave and washing-machine cabinets and metal furniture are all formed from cold rolled coil, where the smooth surface is visible on the finished part.

Cold-formed and light-gauge sections

Light gauge steel studs, joists, rack uprights and general cold-formed profiles are roll formed from CRC, usually in the thinner gauges where surface quality still has to be good.

Precision and electrical steel parts

Sliced CRC strip is used for smaller precision parts, brackets and electrical components where the close tolerance of the material reduces downstream machining cost.

Filing cabinets, shelving and office equipment

Office furniture, filing systems and shelving are made from CRC because of the consistent surface and the ability to hold a tight bend without cracking.

Coated and pre-finished substrate

A large share of CRC is galvanised, colour coated or powder coated after slitting, so CRC buyers are often also the base material customer for a paint line or a coating service.

Typical specifications

ParameterSpecification
Steel gradeDC01, DC03, DC04, DC06, SPCC, Q235, SECCC / ST12 / ST13 for higher strength
Thickness0.20 - 2.0 mm
Width600 - 1850 mm (slit coil from 25 mm on request)
Coil weight3 - 12 tonnes per coil
Yield strength180 - 360 MPa depending on grade and temper
SurfaceBright (BA) oiled, or rough (RA) for painting and coating
StandardsEN 10130 (DC01 to DC06), JIS G3141 (SPCC), GB/T 12752
DocumentationEN 10204 3.1 certificate, surface quality confirmed on delivery

Grade, temper and surface quality are confirmed on the order acknowledgement and matched against the mill certificate. Tell us the grade, thickness, width, coil weight and destination port and we will quote the exact specification - or send us the drawing or a sample and we will match it.

Frequently asked questions

What is the difference between SPCC and DC01?

SPCC is the JIS commercial grade, DC01 is the EN 10130 deep-drawing grade with tighter surface quality and higher formability. We supply both — the right choice depends on your stamping depth and surface finish requirement.

Do you supply coils for high-gloss painting?

Yes. We supply bright and matte surfaces, lightly oiled or dry, with the surface protection level matched to your paint line and the coating you run.

What coil weight can you deliver?

Up to 18 tons per coil, with inner diameters of 508 mm or 610 mm. Slit coils are available on request.

Is MTC available with every order?

Yes — EN 10204 3.1 MTC matched to the heat number on the packing list, with 3.2 available on request.

What is the difference between cold rolled coil and hot rolled coil?

Cold rolled coil is rolled below the recrystallisation temperature, so it comes out much smoother, flatter and closer to final thickness. That is why it is chosen wherever the surface is visible or where tight forming is needed, and why it costs more than HRC. Hot rolled coil carries mill scale, is used for structural fabrication, and is usually pickled before use.

Do you supply CRC as bright surface or rough surface?

Both. Bright annealed, oiled surface (BA) is used for visible and precision work where the surface will be seen or where the downstream process is fine blanking. Rough surface (RA) is used where the coil will be galvanised, colour coated or powder coated, because the rough surface gives better coating adhesion. Tell us which downstream process the coil is for and we will supply the correct surface.

Can you supply CRC slit to narrow widths for a stamping line?

Yes. We slit CRC from 25 mm upwards with deburred edges, in 3 to 12 tonne coils. For stamping lines we usually match the strip width to your die set and confirm the coil weight against your line changeover frequency. Send us the width, thickness, grade and monthly volume and we will confirm the slitting plan and price.

Request a cold rolled steel coil quotation

Mill-confirmed availability, EN 10204 3.1 MTC with every order, and inspection support at your nomination.

Request a Quote